Labelling & Marking Etilux Applicators & Dispensers Labels
Back to tutorials

How do I load a Blitz clip with labels? 11 August 2021

Share

Luc Lambert

Marketing Manager

 

This article covers all the steps to load your Blitz clip with labels.

User guide

Open the transparent black cover of the Blitz clip on top.
01.

Open the transparent black cover of the Blitz clip on top.

Remove any old roll.

Open the flap on the bottom of the clip.
02.

Open the flap on the bottom of the clip.

Pull the two buttons on the sides of the clamp and open the bottom of the clamp by placing your finger just below the small roller on the front of the clamp.

Insert your label roll into the clamp from above.
03.

Insert your label roll into the clamp from above.

The roll should be unrolled a few centimetres and the unrolled part should be slid into the small gap so that it protrudes underneath. The labels should be on the front side of the clamp.

Close the two covers of the clamp.
04.

Close the two covers of the clamp.

They are located below and above.

Insert the end of the label roll behind the small metal roll.
05.

Insert the end of the label roll behind the small metal roll.

Repeatedly pinch the clip until everything is taut and the labels start to come out.
06.

Repeatedly pinch the clip until everything is taut and the labels start to come out.

Your clip is now loaded with labels and ready to use.

Watch our video tutorial on our Youtube channel: https://youtu.be/dwK9vIyDunA 

Back to tutorials
How do I load a Blitz clip with labels?
Next tutorial

Wie verwende ich Clickshare?

Discover our e-shop

A large catalog of products and services available 24/7

E-SHOP ETILUX